Descrição
Praxis Works BB386 EVO Road M30-THRU Pressfit Bottom Bracket
Bottom bracket for mounting Praxis Works cranks with M30THRU aluminum axle in frames with BB386 EVO housing.
The bearing is suitable for the Praxis Works Doon, but also for cranks from many other manufacturers, such as RaceFace/Easton “Cinch”, CaneCreek or Rotor “Rex/3D+”, which have 30 mm drive side / 30 mm non-drive side bearings.
The bearing is suitable for the Praxis Works Doon, but also for cranks from many other manufacturers, such as RaceFace/Easton “Cinch”, CaneCreek or Rotor “Rex/3D+”, which have 30 mm drive side / 30 mm non-drive side bearings.
Features – Praxis Works BB386 EVO Road M30-THRU Pressfit bottom bracket
- Only for cranks with 30 mm/30 mm spindle that are mounted on an 86.5 mm BB386 EVO frame
Product features
- Use: Road
- BB-Type: BB386 EVO
- Bearing housing width: 86.5 mm
- Bearing housing diameter: 46 mm
- Crank shaft diameter: 30 mm drive side / 30 mm non-drive side
- Bearing: Steel cartridge bearing
- Compatibility: Praxis Works cranks with M30THRU aluminum axle and 30 mm cranks from other manufacturers
Note: A press tool (e.g. Park Tool HHP-2 or HHP-3) is required for assembly.
Material
- Bearing shell: Plastic
- Bearing: Steel
Bearing weight
- 110 g (manufacturer information)
Scope of delivery
- 1 x Praxis Works BB386 EVO Road M30-THRU Pressfit bottom bracket
86-6101
850009369369
Avaliações
Não há avaliações ainda.